display filter ip.proto == 47
Add colummn with the following details:
Tuesday, March 26, 2024
Friday, February 23, 2024
VRF Route leaking via static routes
R1
10.170.138.14
|
|
Gi1/9-10.170.138.13
SW001(VRF INTERNET)
|
SW001(GLOBAL)
|
SW001(VRF ATT)
Gi1/2-10.170.137.2
|
|
Gi1/1-10.170.137.1
Router
|
|
network
|
|
10.0.29.3
To achieve this, we do vrf route leaking via static routes. It is not possible to leak directly between to vrfs, but it is possible between vrf and global in both directions.
On SW001:
VRF INTERNET (leak destination to global)
ip route vrf INTERNET 10.0.29.3 255.255.255.255 10.170.137.1 global
VRF INTERNET (leak destination to global)
ip route vrf INTERNET 10.0.29.3 255.255.255.255 10.170.137.1 global
VRF ATT (leak source to global)
ip route vrf ATT 10.170.138.14 255.255.255.255 10.170.138.14 global
GLOBAL (static route to next-hops defined in static routes above)
ip route 10.170.137.1 255.255.255.255 GigabitEthernet1/2
ip route 10.170.138.14 255.255.255.255 GigabitEthernet1/9
ip route 10.170.137.1 255.255.255.255 GigabitEthernet1/2
ip route 10.170.138.14 255.255.255.255 GigabitEthernet1/9
Wednesday, February 21, 2024
Saturday, February 3, 2024
mac securecrt send cisco break to rommon
in securecrt configure session with VT220 keyboard mapping and press F5 continuously when the router boots.
Wednesday, January 31, 2024
OpenWRT linksys with TC and NETEM
install openwrt on e4200v2
Open ssh and http on the WAN (disable firewall)
Via GUI of openwrt (LuCi) install tc-full and kmod-netem
Inject some delay:
tc qdisc add dev internet root netem delay 10ms
Disable delay:
tc qdisc del dev internet root
tc -s qdisc ls dev internet
Sunday, January 7, 2024
vmware esxi letsencrypt certificate
Good info on how to install ssl certificate on esxi
(note that I run 6.5 which only seems to work with w2c 1.0.0)
https://github.com/w2c/letsencrypt-esxi/wiki/Installation-via-Web-UI
https://www.it-connect.fr/vmware-esxi-lets-encrypt-la-solution-pour-obtenir-un-certificat-ssl-gratuit/
Wednesday, August 23, 2023
Defining traffic in Ostinato
The following only applies if you are sending unidirectional traffic and don't care about the traffic not returning.
When you don't resolve the MAC layer (ARP), then there's no need to define devices. Just add streams and in "Protocol Data", open "Media Access Protocol" and make destination the next hop mac (ip neigh show) and source as increment to simulate MAC addresses
Now add the IPv4 IPs
and make sure that the number of packets sent is the same as your source amount
Subscribe to:
Posts (Atom)