Joy of Networking

Wednesday, December 2, 2020

python virtualenv

https://www.dabapps.com/blog/introduction-to-pip-and-virtualenv-python/

create virtualenv for your project

$ cd ~/code/myproject/
$ virtualenv env

install python libraries using pip that came with your virtualenv

$ env/bin/pip install <library>
To run python do
$ env/bin/python ...

Monday, November 23, 2020

MD5 Checksum

Windows (cmd)-> Certutil -hashfile <filename> MD5

Linux -> md5sum <filename>

Cisco -> verify /md5 bootflash:<filename>

Thursday, October 29, 2020

Cisco Firewall

FMC/Firepower Magement Center

🔝
Logical Device FTD/Firepower Threat Defense)

🔝
Firepower Chassis (4100) -> FXOS CLI or https://managementIP (FCM/Firepower Chassis Manager)

Remarks:

Logical Device can be instance Native (use all resources of the chassis) -> only one FTD is possible.
Logical Device can be instance Container -> multiple FTDs are possible.
(container creation is only possible from FMC?)

ASDM
🔝
ASA

Troubleshooting:

packet-tracer simulates a flow and shows the result

https://networkology.net/2013/03/06/using-packet-tracer-for-validating-icmp-traffic/

TCP and UDP being statefully inspected by default, you just have to run the packet-tracer on the source interface and you can be sure the return traffic will be allowed through. With ICMP, it’s a different story.

Because the ASA does not statefully inspect ICMP packets (by default) you have to vouch for the return packets as well. So you’ll be running two packet-tracer commands to verify that ICMP packets go through and come back.

So here’s how you verify ICMP echo and echo-reply using packet-tracer;

For verifying echo packets, type=8 code=0

packet-tracer input inside icmp 10.1.1.2 8 0 172.21.1.2 detailed

For verifying echo-reply packets, type=0 code=0

packet-tracer input outside icmp 172.21.1.2 0 0 10.1.1.2 detailed

Packet-tracer does more than just inject a 'virtual' packet into the data-plane. One can also add the 'trace' option to the capture command, so that actual packets the security appliance receives (which are matched by the capture) are also traced.

access-list icmp8844 extended permit icmp any4 host 8.8.4.4 access-list icmp8844 extended permit icmp host 8.8.4.4 any4

capture myicmp type raw-data access-list icmp8844 trace interface TYPE2-INSIDE capture myicmpreturn type raw-data access-list icmp8844 trace interface TYPE2-OUTSIDE

To view the packet-trace from captured packet #3 in the capture, use the command: ASA# "show capture mycap trace packet-number 3"

Thursday, October 22, 2020

certbot renewal iptables rules

[root@owncloud ~]# cat certificaterenew.sh
#!/bin/bash
echo "Adding temporary lines to iptables"
iptables -I INPUT 1 -p tcp -s 52.28.236.88 -m conntrack --ctstate NEW,ESTABLISHED -j ACCEPT
iptables -I INPUT 1 -p tcp -s 66.133.109.36 -m conntrack --ctstate NEW,ESTABLISHED -j ACCEPT
iptables -I INPUT 1 -p tcp -s 18.196.96.172 -m conntrack --ctstate NEW,ESTABLISHED -j ACCEPT
iptables -I INPUT 1 -p tcp -s 3.128.26.105 -m conntrack --ctstate NEW,ESTABLISHED -j ACCEPT
iptables -I INPUT 1 -p tcp -s 64.78.149.164 -m conntrack --ctstate NEW,ESTABLISHED -j ACCEPT
iptables -I INPUT 1 -p tcp -s 34.209.232.166 -m conntrack --ctstate NEW,ESTABLISHED -j ACCEPT
certbot renew
echo "Deleting temporary lines from iptables"
iptables -D INPUT 1
iptables -D INPUT 1
iptables -D INPUT 1
iptables -D INPUT 1
iptables -D INPUT 1
iptables -D INPUT 1

Wednesday, September 23, 2020

FTD firewall capture

>capture icmp trace detail interface cedge301-dia match icmp any any

> show capture

capture icmp type raw-data trace detail interface cedge301-dia [Capturing - 536 bytes]

match icmp any any

> show capture icmp

5 packets captured

1: 07:12:31.147178 802.1Q vlan#200 P0 192.168.0.1 > 8.8.8.8: icmp: echo request

2: 07:12:33.149726 802.1Q vlan#200 P0 192.168.0.1 > 8.8.8.8: icmp: echo request

3: 07:12:35.141884 802.1Q vlan#200 P0 192.168.0.1 > 8.8.8.8: icmp: echo request

4: 07:12:37.154777 802.1Q vlan#200 P0 192.168.0.1 > 8.8.8.8: icmp: echo request

5: 07:12:39.146690 802.1Q vlan#200 P0 192.168.0.1 > 8.8.8.8: icmp: echo request

5 packets shown

> show capture icmp packet-number 1

5 packets captured

1: 07:12:31.147178 802.1Q vlan#200 P0 192.168.0.1 > 8.8.8.8: icmp: echo request

1 packet shown

> show capture icmp trace

5 packets captured

1: 07:12:31.147178 802.1Q vlan#200 P0 192.168.0.1 > 8.8.8.8: icmp: echo request

Phase: 1

Type: CAPTURE

Subtype:

Result: ALLOW

Config:

Additional Information:

Forward Flow based lookup yields rule:

in id=0x2aaad3b18430, priority=13, domain=capture, deny=false

hits=3, user_data=0x2aaad240bea0, cs_id=0x0, l3_type=0x0

src mac=0000.0000.0000, mask=0000.0000.0000

dst mac=0000.0000.0000, mask=0000.0000.0000

input_ifc=cedge301-dia, output_ifc=any

Phase: 2

Type: ACCESS-LIST

Subtype:

Result: ALLOW

Config:

Implicit Rule

Additional Information:

Forward Flow based lookup yields rule:

in id=0x2aaad399b7f0, priority=1, domain=permit, deny=false

hits=274029, user_data=0x0, cs_id=0x0, l3_type=0x8

src mac=0000.0000.0000, mask=0000.0000.0000

dst mac=0000.0000.0000, mask=0100.0000.0000

input_ifc=cedge301-dia, output_ifc=any

Phase: 3

Type: ROUTE-LOOKUP

Subtype: Resolve Egress Interface

Result: ALLOW

Config:

Additional Information:

found next-hop 10.0.29.182 using egress ifc Outside-interface

Phase: 4

Type: ACCESS-LIST

Subtype: log

Result: ALLOW

Config:

access-group CSM_FW_ACL_ global

access-list CSM_FW_ACL_ advanced permit ip ifc cedge301-dia any4 ifc Outside-interface any4 rule-id 268435458

access-list CSM_FW_ACL_ remark rule-id 268435458: ACCESS POLICY: MainPolicy - Mandatory

access-list CSM_FW_ACL_ remark rule-id 268435458: L7 RULE: Trust-inside-to-outside

Additional Information:

This packet will be sent to snort for additional processing where a verdict will be reached

Forward Flow based lookup yields rule:

in id=0x2aaad3adfb20, priority=12, domain=permit, deny=false

hits=281, user_data=0x2aaac757ea00, cs_id=0x0, use_real_addr, flags=0x0, protocol=0

src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, ifc=cedge301-dia

dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, ifc=Outside-interface, vlan=0, dscp=0x0

input_ifc=any, output_ifc=any

Phase: 5

Type: CONN-SETTINGS

Subtype:

Result: ALLOW

Config:

class-map class-default

match any

policy-map global_policy

class class-default

set connection advanced-options UM_STATIC_TCP_MAP

service-policy global_policy global

Additional Information:

Forward Flow based lookup yields rule:

in id=0x2aaad39b2e60, priority=7, domain=conn-set, deny=false

hits=281, user_data=0x2aaad23ca100, cs_id=0x0, use_real_addr, flags=0x0, protocol=0

src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any

dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0

input_ifc=cedge301-dia, output_ifc=any

Phase: 6

Type: NAT

Subtype: per-session

Result: ALLOW

Config:

Additional Information:

Forward Flow based lookup yields rule:

in id=0x2aaad1846550, priority=0, domain=nat-per-session, deny=true

hits=12362, user_data=0x0, cs_id=0x0, reverse, use_real_addr, flags=0x0, protocol=0

src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any

dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0

input_ifc=any, output_ifc=any

Phase: 7

Type: IP-OPTIONS

Subtype:

Result: ALLOW

Config:

Additional Information:

Forward Flow based lookup yields rule:

in id=0x2aaad39a13e0, priority=0, domain=inspect-ip-options, deny=true

hits=287, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0

src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any

dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0

input_ifc=cedge301-dia, output_ifc=any

Phase: 8

Type: INSPECT

Subtype: np-inspect

Result: ALLOW

Config:

class-map inspection_default

match default-inspection-traffic

policy-map global_policy

class inspection_default

inspect icmp

service-policy global_policy global

Additional Information:

Forward Flow based lookup yields rule:

in id=0x2aaad39afe80, priority=70, domain=inspect-icmp, deny=false

hits=6, user_data=0x2aaad2b08bc0, cs_id=0x0, use_real_addr, flags=0x0, protocol=1

src ip/id=0.0.0.0, mask=0.0.0.0, icmp-type=0, tag=any

dst ip/id=0.0.0.0, mask=0.0.0.0, icmp-code=0, tag=any, dscp=0x0

input_ifc=cedge301-dia, output_ifc=any

Phase: 9

Type: INSPECT

Subtype: np-inspect

Result: ALLOW

Config:

Additional Information:

Forward Flow based lookup yields rule:

in id=0x2aaad39b1120, priority=70, domain=inspect-icmp-error, deny=false

hits=6, user_data=0x2aaad2b09700, cs_id=0x0, use_real_addr, flags=0x0, protocol=1

src ip/id=0.0.0.0, mask=0.0.0.0, icmp-type=0, tag=any

dst ip/id=0.0.0.0, mask=0.0.0.0, icmp-code=0, tag=any, dscp=0x0

input_ifc=cedge301-dia, output_ifc=any

Phase: 10

Type: CAPTURE

Subtype:

Result: ALLOW

Config:

Additional Information:

Forward Flow based lookup yields rule:

in id=0x2aaad3b1fce0, priority=13, domain=capture, deny=false

hits=2, user_data=0x2aaad240bea0, cs_id=0x2aaad240bd70, reverse, flags=0x0, protocol=1

src ip/id=0.0.0.0, mask=0.0.0.0, icmp-type=0, tag=any

dst ip/id=0.0.0.0, mask=0.0.0.0, icmp-code=0, tag=any, dscp=0x0

input_ifc=cedge301-dia, output_ifc=any

Phase: 11

Type: NAT

Subtype: per-session

Result: ALLOW

Config:

Additional Information:

Reverse Flow based lookup yields rule:

in id=0x2aaad1846550, priority=0, domain=nat-per-session, deny=true

hits=12364, user_data=0x0, cs_id=0x0, reverse, use_real_addr, flags=0x0, protocol=0

src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any

dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0

input_ifc=any, output_ifc=any

Phase: 12

Type: IP-OPTIONS

Subtype:

Result: ALLOW

Config:

Additional Information:

Reverse Flow based lookup yields rule:

in id=0x2aaad3933830, priority=0, domain=inspect-ip-options, deny=true

hits=12300, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0

src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any

dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=any, dscp=0x0

input_ifc=Outside-interface, output_ifc=any

Phase: 13

Type: CAPTURE

Subtype:

Result: ALLOW

Config:

Additional Information:

Reverse Flow based lookup yields rule:

out id=0x2aaad3b20390, priority=13, domain=capture, deny=false

hits=1, user_data=0x2aaad240bea0, cs_id=0x2aaad240bd70, reverse, flags=0x0, protocol=1

src ip/id=0.0.0.0, mask=0.0.0.0, icmp-type=0, tag=any

dst ip/id=0.0.0.0, mask=0.0.0.0, icmp-code=0, tag=any, dscp=0x0

input_ifc=any, output_ifc=cedge301-dia

Phase: 14

Type: FLOW-CREATION

Subtype:

Result: ALLOW

Config:

Additional Information:

New flow created with id 12375, packet dispatched to next module

Module information for forward flow ...

snp_fp_inspect_ip_options

snp_fp_snort

snp_fp_inspect_icmp

snp_fp_adjacency

snp_fp_fragment

snp_ifc_stat

Module information for reverse flow ...

snp_fp_inspect_ip_options

snp_fp_inspect_icmp

snp_fp_snort

snp_fp_adjacency

snp_fp_fragment

snp_ifc_stat

Phase: 15

Type: EXTERNAL-INSPECT

Subtype:

Result: ALLOW

Config:

Additional Information:

Application: 'SNORT Inspect'

Phase: 16

Type: SNORT

Subtype:

Result: ALLOW

Config:

Additional Information:

Snort Trace:

Packet: ICMP

Session: new snort session

AppID: service ICMP (3501), application unknown (0)

Firewall: trust/fastpath rule, id 268435458, allow

Snort id 1, NAP id 1, IPS id 0, Verdict WHITELIST

Snort Verdict: (fast-forward) fast forward this flow

Phase: 17

Type: ROUTE-LOOKUP

Subtype: Resolve Egress Interface

Result: ALLOW

Config:

Additional Information:

found next-hop 10.0.29.182 using egress ifc Outside-interface

Phase: 18

Type: ADJACENCY-LOOKUP

Subtype: next-hop and adjacency

Result: ALLOW

Config:

Additional Information:

adjacency Active

next-hop mac address 5000.0042.0004 hits 374 reference 1

Result:

input-interface: cedge301-dia

input-status: up

input-line-status: up

output-interface: Outside-interface

output-status: up

output-line-status: up

Action: allow

Tuesday, September 22, 2020

FTP firewall in EVE-NG add to FMC

Add & Boot device

configure IPv4

manage locally -> yes

show network

In case reconfig is needed: configure network ipv4 manual <ip> <subnet> <gw>

Validate ping from FTD to FMC: ping systems <ip FMC>

Adding FTD to FMC

configure manager add <ip fmc> <password>

In GUI of FMC add the device

Once this is done FTD GUI is no longer accessible.

To revert: configure manager delete, configure manager local

Friday, June 12, 2020

redistributing bgp in eigrp

redistributing internal bgp (ibgp) in eigrp

1)under "router bgp" the following is needed
"bgp redistribute-internal"
2)under "router eigrp" the following is needed
"default-metric <value> <value> <value> <value> <value> <value> "
"redistribute bgp <AS> route-map <route-map>"

(eBGP routes don't need the redistribute-internal command)

eigrp into bgp

https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/213952-configure-bgp-to-advertise-a-default-rou.html

default-route:

network 0.0.0.0/0 or default-information originate

(note: "default-information originate always" is different. This one creates a default-route in the BGP RIB even when there's no default in EIGRP)

Joy of Networking

Wednesday, December 2, 2020

python virtualenv

Monday, November 23, 2020

MD5 Checksum

Thursday, October 29, 2020

Cisco Firewall

Thursday, October 22, 2020

certbot renewal iptables rules

Wednesday, September 23, 2020

FTD firewall capture

Tuesday, September 22, 2020

FTP firewall in EVE-NG add to FMC

Friday, June 12, 2020

redistributing bgp in eigrp

redistributing internal bgp (ibgp) in eigrp

eigrp into bgp

C8000v : logging filtering with discriminator

Report Abuse

Labels